 |
Specter Gear Sling Accessories |
|
|
 |
Mossberg 500 Side Sling Mount
Plate #161
Side mounting is the only way to properly mount a "3 Point"
tactical sling. Until now there has been no way to do this with
a Mossberg 500 shotgun. This sling mount plate installs
underneath the magazine bolt and locks in place by ball detent.
The sling plate is made from steel, has a matte black finish,
accepts up to 1 1/4" wide slings and is completely ambidextrous.
Note: Requires a simple modification of the magazine bolt.
|
$12.95 |
|
 |
Remington 870P, 11/87P & Mossberg 590A1 Side
Sling Mount Plates
Side mounting is the only way to properly mount a "3 Point" type
tactical sling. This sling mount plate installs underneath the
magazine cap and locks in place by ball detent. The sling plate
is made from 4130 steel, has a parkerized finish and accepts up
to 1 1/4" wide slings. |
Mossberg 590A1
Product # 160
$10.00 |
Remington 870 & 11/87
Product # 158
$10.00 |
|
 |
G. G. & G. M-4 / CAR-15 Receiver Sling Mount
(Rectangular Type)
Allows receiver side mounting of our CQB, SOP and HST slings on
collapsible stock M-4/CAR-15 type weapons. Right hand and left
hand specific versions are available.
Note: While this is an easily accomplished, non-permanent
modification of the weapon, qualified armorer/gunsmith
installation is recommended.
|
Right Hand
(For right handed shooters, loop extends off to the left side of
the weapon)
Product # 162 RH
$25.00 |
Left Hand
(For left handed shooters, loop extends off to the right side of
the weapon)
Product # 162 LH
$25.00 |
|
 |
G. G. & G. M-4 / CAR-15 "Agency"
Ambidextrous Receiver Sling Mount
(Rectangular Type)
Certain local, state and federal agencies have now established
policies indicating that if a tool needs to be used to remove a
part of the weapon to install a new accessory it cannot be done
unless the weapon is sent to the agency's armorer or gunsmith
for the installation. This has caused a problem for some
agencies due to time constraints and the absence of local agency
armorers. GG&G has developed the New Agency Rear Sling Adapter
to assist these agencies with this issue. The new GG&G Agency
Rear Sling Adapter only requires that the rear assembly of the
collapsible buttstock be removed. No tools required. The new
adapter then slides over the tube and, once in proper position,
securely tightens behind the castle lock nut. The system uses
two socket head screws for fastening, so that once tightened
there is no chance the sling adapter will come loose. The Agency
Rear Sling Adapter is manufactured for professional use from
7075 aluminum and hard anodized to meet Mil-Specs. A 9/64"
wrench is included for your convenience. |
G. G. & G. "Agency" Ambidextrous Receiver Sling
Mount
Product # 321
$29.95 |
|
  |
G. G. & G. AR-15 / M-16 Receiver Sling Mount
(Rectangular Type)
Allows receiver side mounting of our CQB, SOP and HST slings on
fixed stock AR-15/M-16 type weapons. Right hand and left hand
specific versions are available.
Note: While this is an easily accomplished, non-permanent
modification of the weapon, qualified armorer/gunsmith
installation is recommended. |
Right Hand
(For right handed shooters, loop extends off to the left side of
the weapon)
Product # 211 RH
$35.00 |
Left Hand
(For left handed shooters, loop extends off to the right side of
the weapon)
Product # 211 LH
$35.00 |
|
 |
G. G. & G. Shotgun Receiver Sling Mount
(Rectangular Type)
Allows receiver side mounting of our CQB, SOP and HST slings on
Remington 870 / 11/87 or Mossberg 500 / 590 shotguns. Right hand
and left hand specific versions are available.
Note: While this is an easily accomplished, non-permanent
modification of the weapon, qualified armorer/gunsmith
installation is recommended.
|
Remington 870 / 11/87
(For right handed shooters, loop extends off to the left side of
the weapon)
Right Hand
Product # 212 RH
$27.00 |
Remington 870 / 11/87
(For left handed shooters, loop extends off to the right side of
the weapon)
Left Hand
Product # 212 LH
$27.00 |
Mossberg 500 / 590
(For right handed shooters, loop extends off to the left side of
the weapon)
Right Hand
Product # 213 RH
$27.00 |
Mossberg 500 / 590
(For left handed shooters, loop extends off to the right side of
the weapon)
Left Hand
Product # 213 LH
$27.00 |
Benelli M1/M3
(For right handed shooters, loop extends off to the left side of
the weapon)
Right Hand
Product # 226 RH
$27.00 |
Benelli M1/M3
(For left handed shooters, loop extends off to the right side of
the weapon)
Left Hand
Product # 226 LH
$27.00 |
|
 |
The G. G. & G "Sling Thing" is the most secure
and efficient setup to secure a tactical "3 Point" type sling to
AR-15 and CAR-15 type weapons. The front "Sling Thing" attaches
to the standard AR-15 / CAR-15 front sight assembly offering a
sling attachment mounted high enough to prevent rifle roll as
well as allowing sling attachment for weapons equipped with the
Surefire Millennium weapon light assemblies. The rear Sling
Thing is mounted to the side of the collapsible buttstock on
CAR-15 and M-4 type carbines. The "Sling Thing" is easy to
install, and remove. It's ambidextrous, and there is no
gunsmithing required. The "Sling Thing" utilizes M-16 type 1
1/4" sling loops and is phosphate finished to match your weapon.
 |
G. G. & G. Front Sling Thing
Product # 155
$29.95 |
G. G. & G. Rear Sling Thing
Fits Std. Colt Type Collapsible Stocks as well as Bushmaster &
Rock River Arms Ribbed 6 Position Collapsible Stocks
Product # 156
$34.95 |
|
G. G. & G. Rail Sling Mount & Swivel
Fits all MIL-STD-1913 Picatinney type rail interface fore end
systems. This is particularly useful for units being issued the
new M-16A4 without a side sling swivel assembly.
|
Product # 247
$32.00 |
|
Quick Detachable (QD) Sling Things
Note: A QD Swivel is included with each QD Sling Thing
G. G. & G. Rear Sling Thing (QD)
Fits Std. Colt Type Collapsible stocks as well as Bushmaster &
Rock River Arms Ribbed 6 Position Collapsible Stocks
Product # 196
G. G. & G. Front Sling Thing (QD)
Product # 195 |
Product # 196
$ 38.95 |
Product # 195
$35.95 |
|
All
shipping is via US Priority mail unless other arrangements are made with
me!
